[Lynn Eades]

I need some carefully measured dimensions please;
1. a to b. Hull div. plate out side to air duct cut out (is a to b the same as the opposite side?)
2. a to c. measurement down,
3. a to d. top of div plate to top of guard
4. i to j. depth of radiator hole
5. f to g. depth of front gun slot from top edge (f is hard to see)
6. f to h. width of gun slot
7. e to c. width of air duct cut out.
8. over all width of div plate (b to far side)

You will have to enlarge the picture to see the letters.