so the glue on the roof is dryed up now and I can start by screwing on some strips across the seems on the roof. then I used some kitt to close everything so there can't get any water in.
on the sides I nailed the roof panels to the frame. the front and the back roofpanels I bend down the overlapping part.
now this was bend down I have to make a mall to bend the strips around nice so they can be screwed on the front and back to top things off.
On both sides above the windows ( they have to be made jet) and were the roof starts, there must be a wooden ridge , this ridge is to attache the 2 canvas tent roofs that come on later. these wood strips keep the roof nails in place to. after all this us of a screwdriver, I think about 120 of them I was in need of a big pot off
not
cheers jaap