Jordan
Better late than never, here is the measurements for the CTL12117. It is a rubber strap that is 18" long by 1-3/4 wide. There are two holes on the fixed end which correspond to the screws and retainer which hold it in place.
On the far end are four 3/8 holes. The first of these is located 4-3/8 from the end of the strap. The next 3 holes are each 1-1/2 further up the strap.
The end of the strap is squared off, not pointed, rounded or anything like that. Also, besides the part number being stenciled on the strap, it is also cast into the rubber.
I'll snap a photo next time I am in the shop so that all this makes sense.
Last edited by rob love; 07-02-11 at 03:54.
|