today i sarted by sanding and cleaning the stearing box parts, then i primed them, after that i draged the ball of grease that my transfert case was and i started taking it appart, one of the bearing came appart on me so now i will have to line up about 100 little roller darn it!, i guess they where made like that back then, no cage to support the roller , everything in the transfer case look good and all the bearing and race seem fine, i also fiddled with the horn wire, i managed to save the connector on both end of the rotten wire as well as the number tag and i made a new horn wire since the old one was all rotten, i soldered the end on.
anyhow , enuf talking here are a few pics!
clean power stearing parts!
clean worm gear and cover
ball of grease!
ever wonder waths inside one of them t-case!
brand new horn wire! with all proper fitting and tag!
and some primed hardware and parts!
now i have to rest my old back! later!