here some more pictures of the offside generator door.
I want to use the generator space for storing tools and so.
So I made the door to have hinges and a lock. first thing I did was to test fit
the woodendoor to make sure the hinges are in the right place.
then I made the sheet metal for one side and bended the edges around the wood. now the second sheet was putt on and the hinges to.
On the outside I putt in the sheets with the louvers and made the edges smooth ready for painting. the two locks were putt in place.
so now it neads paint and screwed in to place and the outside is as good as ready, only the ladder neads to be made.
cheers for now
jaap