springs
hi shaun, I have a set here, you can have them but i would like to keep one outer and one inner rear spring for a spare. Before I can give them to you I would need to free them all off as they are all seized, then fit two pairs onto the 1940 carrier, as the carrier currently has two seized rear spring assemblies on which would not free off with the normal hammering with heat. I have been on the look out for some time for a hydraulic press to use in freeing these springs off. If you have the facilitys to do this at the museum then we can get it done, i also need a seized wheel pin pushing out, (like the one you had when you were here last time). let me know if you have a press to do the job otherwise i will ramp up my efforts in getting one off ebay. ideally a 'I' beam box frame would do the job as i have 30 ton jacks to use with it.
see you tuesday kev.
__________________
2pdr Tank Hunter Universal Carrier 1942 registered 11/11/2008.
3" Mortar Universal Carrier 1943 registered 06/06/2009.
1941 Standard Mk1 stowage Carrier, Caunter camo.
1941 Standard Mk1 stowage Carrier, light stone.
10 cwt wartime mortar trailer.
1943 Mk2 Daimler Dingo.
1943 Willys MB.
1936 Vickers MG carrier No1 Mk1 CMM 985.
|