Rick
If you run a straight edge accross the end of the shaft, the centre of the eye is 73 mm out from that line. the eye is 10mm thick.
From the center line through the shaft the eye center is 179mm up.
The eye takes a 7/16" clevis pin (11mm)
My guess is that a center line through the arm is set back 30 degrees from the line through the fork pin.
Any thing lacking or unclear, just ask.
__________________
Bluebell
Carrier Armoured O.P. No1 Mk3 W. T84991
Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6.
Dodge WC55. 37mm Gun Motor Carriage M6
Jeep Mb #135668
So many questions....
|