Quote:
Originally Posted by T Creighton
Hi Tony,
My original ones were two piece which was just as well as the bottom bit was long gone.
I would suggest the base would be best out of treated ply.
Inside is 4 3/4"x1 3/4"
Wall Thickness is about 1 1/8"
Depth is 1 3/4"
Base is probably 1/2" max
Cheers, Terry
|
Tony,
The base has aslope inside the base to allow the rifle butt to sit correctly. It is thicker one end than the other. Don't fall for the trap of making them flat as the rifle won't rest easy.
Regards Rick.
__________________
1916 Albion A10
1942 White Scoutcar
1940 Chev Staff Car
1940 F30S Cab11
1940 Chev WA LRDG "Te Hai"
1941 F60L Cab12
1943 Ford Lynx
1942 Bren Gun Carrier VR no.2250
Humber FV1601A
Saracen Mk1(?)
25pdr. 1940 Weir No.266
25pdr. Australian Short No.185 (?)
KVE Member.
|