Quote:
Originally Posted by Seatyger
Hello Guys;
My Son and I have started to scrape off some rust and get into the initial clean up process. I want to say thanks to those that gave me the Heads Up where to find the Identification Numbers.
The Numbers stamped into the metal in front of the Driver (For lack of the proper descriptor) were as follows from Left to Right-
CT 115075 S O (or 0) 1942 9503 (Then a 2 and 1 laying over horizontally to the right)
Thats is all I could see after some minir scuffing with a 3M Pad. I will bring some white-out to try and make them more legible.
On the angle iron behind the Gunner's Head was stamped CP 1636.
I have been digging through Nigel's Books but can't seem to locate that serial Number range.
|
Hi James
Is there a chance the WD No. is 113075? I can't make out the 5 very clearly so was wondering if it was a 5 or 3. CT113075 would make it contract CDLV213.
Also the 2 lying to the right is an inspection mark and the 1 is likely to be the tail of the arrow which usually goes with the 2.
Not sure what the S or 0/O is unless the S is a 5 for month of manufacture which usually precedes the date.
Anyway congrats on another carrier saved and great project.
Nigel