Quote:
Originally Posted by zemsi
Hi Richard
Thanks for the hint. Unfortunately, both tanks are full and it happens despite that.
cu
Chris
|
OK Chris,
Then it is drawing air through the spindle then. I was thinking it might be drawing from the unused tank as in instances from experience. as said previously, lap the taper tap in with a fine paste, like used for cleaning alloys, etc. One well known brand is Solvol Autosol.
Richard
__________________
Richard
1943 Bedford QLD lorry - 1941 BSA WM20 m/cycle - 1943 Daimler Scout Car Mk2
Member of MVT, IMPS, MVG of NSW, KVE and AMVCS
KVE President & KVE News Editor
|