Wanted to get the pintle brackets, some of the spring hangers (rear) and a few other little pieces painted, so of course it rained and blew a gale. Not sufficient rain to bring the lawn & fruit trees back from death row, just enough to P me off! Got the painting done between squawls regardless.
Stripped back the NOS rear light sets, and repainted in my color, then repainted the brake lenses. I used a commonly available spray product designed for aftermarket modifications to plastic lenses and bulb coloring. It worked very well. I will buy the equivelent for the amber lenses, later this week...............if the shop is open, with Christmas and all. I will have a rear 'tail' light on both sides, same as the brake lights will be. At this stage no indicators are planned. The system will be remaining 6 volt, after considerable deliberation. I removed two white disks from inside each rear light tube. I gather these are some kind of 'diffuser' for the bulb, or maybe to reduce the light intensity? I have left them out for better light intensity, and a test of the bulbs now, has shown they glow bright and both brake lenses are equal in color, as far as I can tell anyway.
While i'm thinking of it, does the phrase "Keep your eye on the ball" come from the 'Red Ball Express'? Just a thought.
Also painted the side mirrors I got in Honolulu, as well as the second TAC plate and holder frame. I planned to put the PASS writing onto it tonight but time has gotten away from me so i'll do it tomorrow night.
Will also clean up the NOS rear brake connector blocks tomorrow night too. Got those, and new bolts & connectors from MacsAuto some months ago.
I put todays left over paint to good use, and painted all the new bolts currently on the chassis. That took a couple of hours or more, and a fair percentage of the bolts/nuts won't ever be seen, but they are now looking the part. The master cylinder bolts are a real pain to brush paint with the booster cylinder insitu, as are several others, such as the drivers side step bolts to chassis. With the battery box there it's hard to get at them all properly. Got em all in the end though
Off to bed now. Back to work tomorrow.............sigh
