View Single Post
  #1051  
Old 03-04-13, 00:55
Jacques Reed Jacques Reed is offline
VMVC
 
Join Date: Jul 2012
Location: Victoria Australia
Posts: 864
Default Left front backing plate

Quote:
Originally Posted by Private_collector View Post
I discovered yesterday that the welded on brake backing plate (driver side) is also marked RF. So is the left hand side! That means I already have my replacement for the one I will be cutting off, but will need to find a LF one.
Hi Tony,

I have one if you want it. Was going to use it then two NOS plates came along my way many years ago. It's for a F15A but I think all the backing plates are the same, just the front drums are different between the big and small Blitzes, but maybe someone can confirm.
I removed the broken brake adjuster springs, a common problem I have noticed on these vehicles. There is a slight bit of pitting on the bottom corner but otherwise it is in good shape. It was cleaned up in molasses and painted so all you need to do is repaint it to match yours.
Had some new springs made up so can include them with the cams, bolts, and washers so all you need to do is weld the bolts back on to the two cams.
It yours for the postage if you want it.

Cheers,
Attached Thumbnails
IMG_5259.jpg   IMG_5260.jpg  
__________________
F15-A 1942 Battery Staff

Jacques Reed
Reply With Quote