Thread: Wanted: Barrel to mock up a cannon
View Single Post
  #1  
Old 18-08-13, 06:45
Jon Bradshaw's Avatar
Jon Bradshaw Jon Bradshaw is offline
Registered User
 
Join Date: Jan 2009
Location: Prince Edward County, Ontario, Canada
Posts: 270
Default Barrel to mock up a cannon

I would like to mock up a cannon on my reproduction Vickers model 1937 command tank. Originally it would have had a 2pdr / 40mm barrel. I would love a section of a barrel with rifling to make the end so that when it is looked down ( as it will be) it looks the part. A complete barrel or part of one, something between 30mm and 50mm would pass casual inspection. Anything between 2ft and 6ft long would be good. Also if it had a muzzle brake? But that is something I can make to fit it. Anti-aircraft barrel would work as well, I could weld it into a bigger pipe.

A bit of a long shot but if it's out there, I'm sure somebody on here has one.

Probably best not to try to import it, so just guys from Canada.

Last edited by Jon Bradshaw; 18-08-13 at 07:31.
Reply With Quote