Thread: Rear axle seals
View Single Post
  #6  
Old 05-09-13, 18:24
Phil Waterman Phil Waterman is offline
Moderator
 
Join Date: Feb 2003
Location: Temple, New Hampshire, USA
Posts: 3,929
Default May be the same as used on Chevy CMPs as well?

Hi Maurice and Lynn

The picture of the seal looks like those used on 3-ton Chevy CMPs as well and I have never found a modern replacement. So if anyone does find a modern equivalent please make a general posting on the source.

Does anyone have the Carrier part number for this seal so we can see if it is the same as used on Ford and Chevy CMPS?

There was a lengthy thread on these type seals (outward sealing) concerning trucks some time back that I will try and find.

These seals on the trucks are really not critical as you really need to get the truck on quite a side angle for the differential lube to run out this far in the housing, but on a carrier it maybe much more critical.

Cheers Phil
__________________
Phil Waterman
`41 C60L Pattern 12
`42 C60S Radio Pattern 13
`45 HUP
http://canadianmilitarypattern.com/
New e-mail Philip@canadianmilitarypattern.com
Reply With Quote