Dale,From memory 6305-2rs. (2 rubber seals)
Measure the o.d. of the bearing you have(or the housing it fits into)
The spindle is 25 mm. the width is 17, 18, or 19mm. (I can't remember)
Is the o.d 62mm?
If so, 62 x 25 x 17 = 6305. It is a common bearing and your bearing shop should stock it. It is the same as the three that are in the cam plate and rollers.
Please be sure of the sizes, so that I don't put you crook. What ever is the std width for the bearing is correct, as long as the I.D. and O.D. are correct.
Yes it is a direct replacement. Yes it should give you slightly more feel to the steering.
Make sure you line up the two spline parts at the top. both should be marked.
__________________
Bluebell
Carrier Armoured O.P. No1 Mk3 W. T84991
Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6.
Dodge WC55. 37mm Gun Motor Carriage M6
Jeep Mb #135668
So many questions....
Last edited by Lynn Eades; 12-09-13 at 08:16.
|