Yep, brass 1/2 inch diameter drift used with a light mallet or hammer. Be sure to tap alternating edges from the back side and the bearing race will slide right out with ease along with the bearing and seals if still installed.
Lots of paper towels on hand and use of latex gloves makes it a cleaner job as well.
__________________
David Gordon - MVPA # 15292
'41 Willys MB British Airborne Jeep
'42 Excelsior Welbike Mark I
'42 BSA M20 Motorcycle
'43 BSA Folding Military Bicycle
'43 BSA M20 Motorcycle
'44 Orme-Evans Airborne Trailer No. 1 Mk. II
'44 Airborne 100-Gallon Water Bowser Trailer
'44 Ford T-16 Universal Carrier
'44 Jowett Cars 4.2-Inch Towed Mortar
'44 Daimler Scout Car Mark II
'45 Studebaker M29C Weasel
|