Thread: Hup interior
View Single Post
  #4  
Old 03-02-14, 18:26
Phil Waterman Phil Waterman is offline
Moderator
  
Join Date: Feb 2003
Location: Temple, New Hampshire, USA
Posts: 3,929
Default Photos of Rifle Cup Locations
Hi Maurice

First I check my HUP against my Pattern 13 C60S while the two mounting locations for each is 3 inches center to center. The HUP uses 1/4x20 captive nuts welded under the floor while the C60S uses 5/16x? threaded directly into the 1/4 thick floor plate.

Drivers Seat
Click image for larger version Name: 1 Right Driver Rifle Clip & But Holder CMP.jpg Views: 7 Size: 63.0 KB ID: 63233 Click image for larger version Name: 2 Right Driver Rifle Clip & But Holder CMP.jpg Views: 5 Size: 90.1 KB ID: 63234 Click image for larger version Name: 3 Right Driver Rifle Clip & But Holder CMP.jpg Views: 5 Size: 61.3 KB ID: 63235

Front Passenger/Co-driver
Click image for larger version Name: 1 Left Front Rifle Clip & But Holder CMP.jpg Views: 6 Size: 92.2 KB ID: 63236 Click image for larger version Name: 2 Left Front Rifle Clip & But Holder CMP.jpg Views: 5 Size: 62.7 KB ID: 63237
__________________
Phil Waterman
`41 C60L Pattern 12
`42 C60S Radio Pattern 13
`45 HUP
http://canadianmilitarypattern.com/
New e-mail Philip@canadianmilitarypattern.com
Reply With Quote