[Ric Davies]

G'day Dale, yep your seals look spot on and mine are doing a good job 3years on. With the bearings I replaced 5 and reused the rest. I put the best of them into the 4 displacement wheels due to the side load when steering. I think small pits in the bearings will be ok well lubed, my worst had probly had a good mm of side play at the centre and are in the rear road wheels. You would have to put the seal carriers on the end of a piece of heavy pipe close to the same OD then a smaller piece on the inside of it and don't be shy with the hammer.
Good job with the project. Ric