Brian
I apologize for the late response, but I am currently wiring my mk1 dash, and was just replacing the resistor/fuze assembly today.
I got a new assembly from Mac's auto and measured the resistance of both the original and the new one. Both measured at 4 ohms. In the case of the mk1, the resistor would be for the reduction in voltage to the coil.
The screws on the new one will not be any good for the carrier (too log and too bright), so I will have to salvage the old ones. You also have to salvage the old spacer/insulator for underneath this assy. But otherwise it is spot on. FUC=03 lists it as 11A-12250 although Mac's part number is 47-14615-1 with an alternate of 40-12250-A.
Last edited by rob love; 20-05-14 at 05:04.
|