You will likely find most of this information with a read through the archives. If you consider buying Volume I and II of Universal Carriers by Mr. Nigel Watson, you should enjoy that immensely. Mr. Watson writes a good book: as well as being a superb host for wandering Colonials who occasionally venture across the pond. Nigel shares that character with the likes of S. Hindle, S. Garrett, M. van Aalderen and T. Jones. I digress.
In Ontario, a purchase of the carrier manual copies UC-F1 and FUC-03 from Brian Asbury in Acton (BCA on MLU) will provide hours of distraction and cloud your mind with useless trivia.
Straight spoke bogie wheels on T16 to serial number 1900. Offset spokes before solid disc Kelsey Hayes.
All steel return rollers can be found on late MK-I*, as well as the MK-II*, and T16. I have a 1943 MK-I* within a few hundred numbers of yours, it has rubber return rollers. Perhaps you started off with rubber, but at some point in service life they were replaced with the all steel return roller? With your engine being rebuilt in 1952, I wager there was other work completed to service your carrier.
Who knows what has been done after disposal by DND.
T16 engines are not the same as U.C. MK-I* or U.C. MK-II*. However, an interchangeability list does exist in the American produced T16 SNL manual for a small number of engine parts and other bits off the Canadian production MK-I*.
Last edited by Michael R.; 25-07-14 at 21:02.
|