Cam setup advice ?
Hey folks, I have been setting up the carrier brakes etc which are perfect now, but noticed that part of my previous woe's were also related to the cam... One roller had moved 10mm clear of the cam ! I re adjusted the rollers ( the inner one is an absolute pig to get to) then crossed them both down with a socket and bar, checked they were both in contact with the cam in it's neutral position.
I then made a couple of turns in the carrier and noticed I had no warp steer... Sure enough the rollers were away from the cam again.
Any idea's ? Am I missing something ?
__________________
is mos redintegro
__5th Div___46th Div__
1942 Ford Universal Carrier No.3 MkI*
Lower Hull No. 10131
War Department CT54508 (SOLD)
1944 Ford Universal Carrier MkII* (under restoration).
1944 Morris C8 radio body (under restoration).
|