Brakes seen to
Hanno, thank you for your kind words. We want to do a good job.
Today we fitted a proper pair of Woodruffe keys to the brake cross shaft and fitted the assy back onto the chassis. What a difference to the pedal and its position, adjustment to the master cylinder linkage will be required to bring the pedal down to allow 1/2 inch of free travel before the brakes act and I need to refit the clutch linkage. I'll do that with the ramp up once we've done the final fit of the front panel assy.
Pic 1 shows the brake cross shaft looking through the headlamp aperture, not a good pic I'm afraid.
Pic 2 the ankle freezer door bolts have been replaced and work properly, the front panel's loosely hung awaiting the arrival of the panel mastic/caulk, which arrived just as we were packing up!! We trial fitted the bonnet and grille, the grille needs narrowing a tiny bit, which we'll do as the grille needs a bit of refurb work anyway.
Pic 3 we need to weld on the bonnet catches at some point, but it's all coming together at last.
Jerry
|