[cordenj]

Earlier in this thread I raised the question about fuel pump priming after the truck has stood for a couple of weeks.

Following on from comments received, I decided to fit an electric fuel pump to be used to pump up fuel before starting.

The C60s is still running all original 6v systems, and the only suitable 6v pump I could find was more than £100.

But I've already fitted a 12v high capacity leisure battery in a wooden box behind the left-hand step to run the Xenon warning beacon and sat-nav. Just charging it up from mains when necessary.
So found a 12v FACET pump on Ebay for £20 and have fitted it behind chassis by the 12v battery using a mounting plate and original holes in chassis. A toggle switch mounted on cab floor allows me to manually pump up fuel to start and then the engine runs on the normal diaphragm pump. I think an added advantage of this set up could be that if it gets fuel evaporation in hot conditions, can use pump to overcome the block.