cooker for MkI
The MkII cooker does NOT fit the tray from the Mk I carrier. The original MkI cooker, as Kevin says, did not have the pull out drawer at the front with the petrol tank. The tank was loose in the box and was taken out and fitted before use. The basic Mk II box would fit the tray if it were not for two studs on the side and the drawer at the front which slightly increases its length – see the attached photos, which show a couple of Mk II cookers and an original tray TL13251. The second and third photos show the cooker (not) fitting in the tray. Presumably the MK 1 cooker box does not have the studs on the side, but I have never seen one – been looking for one for ages.
Rick
|