[Jacques Reed]

Just an aside to my previous post:

While following Gina Vampire's excellent thread on WW2 paint I can really appreciate how hard it is to track paint colour changes of 70+ years ago.

Even in modern times there seems to be little standardization of terms for paint.

Case in point: in the 2005 issued APAS 0006/2, as shown on an old can of paint that I have initially used on my CMP ford, it specifies "Low Gloss" however the manufacturer, Wattyl, calls it "Semi Gloss". That is probably a more accurate description as APAS 0006/1 is "Flat", And APAS 0006/3 is "Full Gloss" so the assumption is APAS 0006/2 is in between.

APAS 0006 refers to the 3 gloss levels but only refers to the colour as US FS 595B 34088 which is the matt chip. FS 14088 would be the gloss chip and 24008 would be the Semi gloss chip.

To further add confusion some manufacturers call low gloss paint flat or matte.

Even the names can be confusing as Camouflage Green is also referred to Olive Drab in the 2009 issued APAS 0165 Which is FS 595B 34008.

Anyway as a mater of interest I have attached a photo for comparison only of a part painted in Wattyl Semi Gloss Olive Drab, (the same colour/different gloss as the Protec aerosol) and a paint chip of the paint I had mixed to a good sample part colour which I hope is a lot closer to the late war KG J thanks to Gina's great thread.

I have bitten the bullet and will be repainting the truck as I go in that colour.