Tire instal Part 7
Now for the top half....
Pic 37.... That is my hand smearing some "snoth" on the top half of the tire bead in preparation for the top half of the rim to be dropped on the tire.
Pic 38 Top half of rim is in place and with a little pushing by hand the two longer tire studs are just protruding enough to install the two nuts.
NOTE all nuts and studs had been cleaned with a die&tap and the thread given a wallup of antiseize compound.
Pic 39 we hand tighened the two longer studs/nuts and squeezed the side wall just enough to catch another 2 nuts.
Pic 40.... home stretch...... criss crossed tightened all nuts until the rims halves are totally in contact with one another.
Pic 40 tire bead has not yet fully creeped up to the top rim. tire only has about 3 pounds of pressure at tis point.
DO NOT FORGET...... The bottom half of the tire is far from being seated at this point so watch our fingers.
__________________
Bob Carriere....B.T.B
C15a Cab 11
Hammond, Ontario
Canada
Last edited by Bob Carriere; 05-01-16 at 04:10.
|