Thread: Engine oil cooler feed line insert.
View Single Post
  #1  
Old 03-04-16, 22:19
ajmac's Avatar
ajmac ajmac is offline
Alastair McMurray
  
Join Date: Sep 2006
Location: Lincoln, England
Posts: 434
Default Engine oil cooler feed line insert.
Does anyone have a photo of the fitting that threads into the block to direct the oil flow to the cooler? I've got one but I don't know if it came from a universal and the British parts book doesn't show it. The one I have is about 2" long and machined as one part including the thread for the block and the thread for the nut of the fitting. It's also waisted to allow oil to get around it over to the port that exits from the side of the Bell housing.
Attached Thumbnails
image.jpg  
__________________
Alastair
Lincoln, UK.


Under Restoration:
1944 No2 MK2 Loyd Carrier - Tracked Towing
1944 Ford WOT6 Lorry

The Loyd on Facebook
Last edited by ajmac; 03-04-16 at 22:29.
Reply With Quote