View Single Post
  #10  
Old 28-05-16, 12:57
Richard Farrant's Avatar
Richard Farrant Richard Farrant is offline
Registered User
 
Join Date: Feb 2003
Location: Kent, England
Posts: 3,641
Default

Quote:
Originally Posted by mlombard View Post
Hi here's some additional information I got from a chap in the UK, called Peter Mason who has a OYD and seems to know a thing or two about OY's

Early Bedford OY's
Civilian type front hubs with thin rims and tyres
Different Bush Bar
Cast Hand Brake lever
Different dash
Different instruments
Bellows type air cleaner

Late Bedford OY's
Roof Ring
Lifting Rings on Hubs

He quoted chassis no.'s 59680 to 77820 were 1941 production and this would put mine if it was chassis no. 73076 as mid to late 1941, but remember this is only going off the engine no. which rick has given, so the question is did chassis and engine no's line up, this may or may not be the case. I guess the key is to know the chassis no which I'll have another look for, and then to know the production sequence.
Hi Matt,
Not quite as cut and dried as all that. There would be very few OY Bedfords around with the civilian type wheels with twins on rear. Most were lost in France and Dunkirk in 1940. The bellows air cleaner could be found on later OY's. The year of your chassis number, assuming 73076 is correct would be 1943 as production that year was chassis numbers 68618 to 79852 (according to Bart V and he was a stickler for accuracy of facts). The cab cupola was introduced at chassis no. 78696 and another feature worth checking is to see if the top half of the cab was removable, as this feature came in to production with Chassis no. 43522.
On the dashboard, if you have a large round lighting and ignition switch in between speedo and combined gauge, then that feature came in on ch. no. 43522 (1941), this carried through to end of production.

regards, Richard
__________________
Richard

1943 Bedford QLD lorry - 1941 BSA WM20 m/cycle - 1943 Daimler Scout Car Mk2
Member of MVT, IMPS, MVG of NSW, KVE and AMVCS
KVE President & KVE News Editor
Reply With Quote