Quote:
Originally Posted by Stuart Fedak
I am in the final stages of getting an Iltis body ready for painting. I am looking at options for undercoating the wheel wells and the bottom of the floor and options for undercoating. I want to ge this done before putting the Iltis body tub back on the frame.......
I am thinking about something like the 3M rubberized undercoating or a Canadian version that is carried by the local auto restoration jobbers. It appears this is applied with a Schutz gun or similar device with low pressure compressed air. There are also extension hoses available for getting into the rocker panels and other holes.
Are the Schutz guns a single use device or can they be cleaned after use?
Any tips and tricks on the use of this sort of treatment?
Your thoughts?
Stuart
|
Stuart, long time no hear/see. Consider shooting truck bed liner on it and it would be around longer then us on this mortal plain.