Yesterday we attached the running boards. As we had only one front r/b bracket in very poor condition, we decided to make two new brackets from scratch (painted red in the photo). Another reason for making new front brackets is that the original "top hat" spacers welded to the under side of both running boards, were so badly rusted that they were un-usable. That created a 50mm gap between the running board and the original brackets, so we made our new front brackets 50mm higher. We then filled the gap on the rear r/b brackets with a wooden spacer. We have not yet bolted the LHS mudguard to the running board, but it looks like it will be a nice tight fit.
Purists will note from the photo that our mudguards do not have the correct curve at the front (near the bumper) for LRDG configuration. We may decide to fix this later, but right now it is not a high priority.
|