Thread: Our LRDG Chev
View Single Post
  #179  
Old 21-10-16, 07:54
Andrew H. Andrew H. is offline
Registered User
 
Join Date: Dec 2010
Location: New Zealand
Posts: 201
Default

Today we made and installed new sills for the running boards from 2mm sheet steel, made new floor boards from 20mm plywood (the original steel floor was toast) and bought four used radial tyres. The modern tyre specification equivalent to the original 10.5 x 16 inch tyres used by the LRDG is 265/75/R16 but strangely that outer diameter is too small compared to the tyres shown in the WWII photos. The second-hand tyres we bought are significantly larger at 315/75/R16 but much better-proportioned (see pic).They are worn but have enough tread for our purposes. We gave up looking for correct 10.5 x 16 sand-pattern tyres with highway speed capability, a long time ago. But we will have to remove that Yokohama brand name!
Attached Thumbnails
New floor (R).jpg   RB sill (1R).jpg   Yokohama tyre (R).jpg  

Last edited by Andrew H.; 21-10-16 at 21:43. Reason: Further thoughts
Reply With Quote