Quote:
Originally Posted by maple_leaf_eh
|
G'day Terry,
Thanks for the link about molasses - it is great stuff. I am not sure of what state or country your "on the river flats in a poor part of town" is? Your description from your signature line. If you look at mine it says Bundaberg - Queensland Bundaberg is one of the main sugar cane growing areas. I have sugar cane across the road in front of my house and about 50 metres from my back fence
There are some alloys that get eaten by the mix though. I have to dig around and re familiarise myself with which ones.
P.S. With the magic of the Interwebby ... Accessed November 13, 2016 from,
http://www.mtfca.com/cgi-bin/discus/...slowpoke-users Molasses will start "moon crater" pitting cast iron if left in too long. Not a problem really on brackets, but engine blocks will pit on the machined surfaces.
From the same forum/thread -
http://www.mtfca.com/cgi-bin/discus/...=matthew-users Be warned I let a Cylinder Head set in this solution for over 2 weeks and it started to eat the Cast Iron. I should have pulled this no more than 3 days.
From another forum...The Australian Land Rover Owner's Accessed November 13, 2016 from,
http://www.aulro.com/afvb/projects-t...ml#post1356303 DON'T place Any non-Ferris metals in molasses as you wont get it back. It converts alloy and brass to a horrible sandy mess in the bottom of the tub.
Got it - this was the old post I was looking for ... Accessed November 13, 2016 from,
http://www.aulro.com/afvb/projects-t...ml#post1418961 A 1:4 (molasses:water) will eat white metals like aluminium, lead and zinc. Put a seized block into a bath and in a couple of weeks you'll have a clean block with the rings sitting in the hollow bores. The author of the message used the properties of molasses to their favour ... Accessed November 13, 2016 from,
http://www.aulro.com/afvb/projects-t...ml#post1420119 However if you have a seized block where you have tried all the regular methods to get the pistons out, the fact that it eats white metals, is a benefit! New pistons are easier to find than a 1948 side plate Landy block.
Hello Diana
Kind Regards
Lionel