Bringing this thread back to life.
After a spring/summer/fall break I am back on the CMP. I have a couple of different trucks that were sourced one being a F15A with the regular box and a well the other being a KL tuck, i have decided to go down the KL route.
I brought the KL chassis in a couple of weeks ago with the goal to get the motor running I dropped the oil pan and cleaned out all the gunk and got it to fire up.
https://youtu.be/lD6AKC6ghD0
Here is the start up, the truck was probably sitting for 30 plus years with out starting, it Had no compression on 2 cylinders due to stuck valves with super dave's advise i was able to get the valves unstuck and running real smooth.
This was today!
https://youtu.be/5XYaeiizQZ4
Also uncovered a rebuild tag on the motor.