Some assembly required. I was extra careful to ensure everything was lined up before tacking the parts into position. It is amazing how parts can appear to be lined up, you clamp and measure and then measure again only to find its out by 1/4" Re clamp and re measure and then weld.
For the table top, after careful study of the hole pattern, there is three sets of holes for the various WS carriers. Some of the holes are 3/8" diameter. I chose to drill most of them only to 1/4" for now. I figured its a lot easier to drill them larger down the road vs having them too big now.
__________________
Jordan Baker
RHLI Museum,
Otter LRC
C15A-Wire3, 1944
Willys MB, 1942
10cwt Canadian trailer
|