If you have a dried out can of the flattening compound
Hi Mike
Couple times I have come across or had a can of the paint flattening compound dry out. Have had very good luck making the big lump usable again by regrinding it. Simply dropped the chunks into a food blender, close lid and hit blend. Just kept repeating until the entire quart was reduced back to fine powder. Put powder in fresh can added enamel reducer then mixed with color strain and paint.
Before someone asks no not the blender from the kitchen, an old one. They are often cheap at yard sales. Have also used the same process on old military paint that has skimmed over in the can. Not for painting vehicles but for painting non-critical things like gas cans, tables etc. Seems to work well and last.
One comment in general on painting with flattened paint, only put the fattening in the top coat, so under color layer provides a good seal.
Cheers Phil
|