[Les Kovacs]

Thanks Rob....I will try to locate the 3 upward pointing screws on the carb base and tighten them....I have noticed over the months that many nuts & screws were loose possibly due to the rough ride and overall shacking the jeeps does as I drive it.

I will take off the cap and check everything underneath....however, I will not replace the points & condenser as you suggest. However, I have heard that you have to lube some points pad?....this is mentioned in the manual I have but there is no picture.....any chance that you can send me a pic as to what has to be lubed under the distributor cap?

Regards,

les