TERMINALS, Aerial, No. C1 ZA/CAN 4716
At some point the front panel of the Sender took a hit on this TERMINALS, snapping the small phenolic resin mounting plate for it. I had hoped it was a simple break that could be carefully glued back together, but no such luck. As you can see, a clean break on the left side but nearly 1/8-inch of material has gone missing on the right side.
Fortunately, an identical TERMINALS is mounted on a somewhat larger phenolic board on the 52-Set Receiver and I have one available on my spare receiver. I will have to identify and source the small plated brass tube rivets used to mount the board to the front panel before I can do the replacement, but at least it is doable.
David
|