I have a 15cwt with a 3 ton two speed transfer. You must redrill one of the top crossmember mounting holes and exchange the lower mounting bracket with one from a c60 machine ss the bolt holes on a 3 ton case are further apart than on a 15cwt. Actually a useful conversion as it adds both a low range and a heavy duty pto drive...the opposit would also be correct if trying to put a single speed box in to replace a two speed.Finally ( Grant your thoughts) there are c60x transfers which are also two speed but I believe they are even wider and heavier than a c60 box..BP
Last edited by Bob Phillips; 14-06-20 at 16:48.
|