View Single Post
  #7  
Old 31-07-21, 00:11
Phil Waterman Phil Waterman is offline
Moderator
 
Join Date: Feb 2003
Location: Temple, New Hampshire, USA
Posts: 3,929
Default My two cents

Hi Grant

I suspect that the arms with the mid point hold notch are an improvement to prevent or reduce broken windscreens. The long arms without notch/hold notch are prone to slaming shut as you reach the terminal velocity of CMPs of air speed of 50 MPH. Which maybe reach on flat ground after a twelve minute run, or down 9% grade at mid throttle, but exceeding 50 MPH air speed is more often encountered when hit by strong head wind. When this happens even with the hand wheels tight the windscreen slams shut with real force. If one of hold tight handles works better than the other then the window really gets racked.

This was also a problem on M37 when they are up engined, you had to drive them with the windscreens shut, or breaking the windscreens was a problem.

Cheers Phil
__________________
Phil Waterman
`41 C60L Pattern 12
`42 C60S Radio Pattern 13
`45 HUP
http://canadianmilitarypattern.com/
New e-mail Philip@canadianmilitarypattern.com
Reply With Quote