View Single Post
  #3  
Old 03-06-22, 02:25
Jacques Reed Jacques Reed is offline
VMVC
 
Join Date: Jul 2012
Location: Victoria Australia
Posts: 864
Default Ford CMP- Front hub seals

Hi Mark,

The front hub seals you require I assume are the attached?
Pocket in hub for seal is shown with seal removed and the seal.

Imperial measurements of the sample should be enough for any bearing or seal supplier to match up. As a check you can measure the ID of the pocket, the OD of the steering end which it seals upon, and the depth of the pocket.

I downloaded the CR Seals catalogue and it is a wealth of info on seals.

Yes, the quote for the rear seals were outrageous but I only put it up to show the seal and the Timken/National number. You should be able to do a better price.

Rear seal BB 1175 C is a generic Ford part number for 1934 to 1948 large trucks so is available at a few vintage Ford parts suppliers.
F-15A Parts List refers to it as BB 1175 C also, so it is not unique to CMP vehicles which makes obtaining them easier.

Cheers,
Attached Thumbnails
IMG_0005.JPG   IMG_0115.JPG  
__________________
F15-A 1942 Battery Staff

Jacques Reed

Last edited by Jacques Reed; 03-06-22 at 02:44. Reason: Added rear seal info
Reply With Quote