View Single Post
  #3  
Old 30-04-23, 23:52
Jacques Reed Jacques Reed is offline
VMVC
 
Join Date: Jul 2012
Location: Victoria Australia
Posts: 864
Default Ford CMP Horn

Hi Robert,

As they say in the cooking shows- here's one I prepared earlier.

The original bracket to the horn has 4 thin spring steel leaves riveted to the arm as shown.

Two wires to it. One goes to the battery side of the starter solenoid and therefore is always "hot" and can operate without the ignition on.

The other goes to the horn button and when pushed, closes the circuit to earth energizing the horn. Those are not original wires but just for testing purposes. Original wires are in harness that go behind front crossmember with eye terminals that attach directly to horn.

Cheers,
Attached Thumbnails
IMG_0110.jpg   IMG_0112.jpg   IMG_0091.jpg  
__________________
F15-A 1942 Battery Staff

Jacques Reed
Reply With Quote