COIL, Aerial Tuning No. 2 A ZA/CAN 4725
My parts coil revealed the number ‘8798’ stamped on the same parts as the four digit number that was found on the Coil assembly for the 52-Set, as per the first three photos.
The main difference was the Part Number for the Coil itself was not along the left edge of the drum, but now located on the left side plate of the drum. See last photo.
So if these numbers are indeed Production Control Numbers, then this Coil assembly came down the line a lot later than the first one. Is the new location for the coil Part Number as production change for some reason, or just a fluke?
David
|