[Bob Carriere]

Your best bet for those parts is to explore your Australian CMP nut social circle.

Any one who has worked on CMP usually has some old spare axles and those parts never really wear out and are usually thrown out in a spare box under the work bench..... EXCEPT for that little U shape lock clip and pin...... if they were removed carefully they can be re used,,,, they are hard to find new unless you deal with a patient heavy truck parts clerk who is knowledgeable on old brake systems....remember a Ford or Chev CMP axle has the same parts for the brakes...... all FORD parts.

In a pinch you can get by making your own U Clips using a suitable flat washer and a bit of grinding, propane torch and hammering.

International Postage cost would kill you unless you really live at the far end of a long remote country road. If you were Canada, I would say drop by I will give you the parts from my stack of spare axles. If you get the chance try to get the whole back plate assembly with all the loose parts....... same goes for brake drums, wheel nuts, etc....... the larger your network the easier it gets....

Good luck

Bob C

Some Aussie CMP "Compadre is likely to respond".......