[c. ladouceur (RIP)]

Bruce,
I have an original,(it is painted green with slight traces of white peeking through).I will try to post pics or p.m. you with dimensions. Disc is 5 in. dia.,3/16 thick ,with( 2 x) 5/16 holes drilled diagonally at 1/2 in. centre from outside edge. There is a 5/16 bolt,1/2 long-(head of bolt is removed)-welded to center of arc of longest muffler bracket.There is another 5/16 bolt x5/8 long,which attaches to a 9in.long x 1in wide x3/8 thick bar. The end of the bar opposite the disc is cut at 45 deg. and has 2 holes drilled,1 at 1in,the other at 2 in. The holes are 1/4 dia. ,drilled on opposite sides of centre line running length,with the 1 in. hole on side nearest the point of the 45 deg.cut. Hope that is enough and not too much, LOL!
Cliff Ladouceur.