Quote:
Originally posted by Howard
Question:
Time permitting this weekend I intend to convert the ignition system over to 12v. I have read up elsewhere on MLU about this but I have one question. I am fitting new spark plugs, should I regap (increase gap) the plugs to handle the extra jolt? And is the condensor OK with the increased load?
Thanks all,
HH
|
No need to change the gap on your spark plugs as you're going to install a ballast resistor if you use the original coil, right? I'd install a condensor from a 12V to be on the safe side. Good news, 6V points work just fine on 12V systems. Hope this info helps.