tool box's
Trying to determine the approx year, cab model and cargo box combination that these tool box's would have fit .
The welded assembly on the Rh side was installed with a 1B2 cargo box and has cut outs for gas tank spouts, w/spare tire clamps, seems unusual to be mounted with a 1B2 box ? unless the 11 cab long wheel base 15wt 2wd used a tool box, seems unlikely as the 1B2 box is about 12 inch longer than the 2B1 box so there does not seem to be room for this combination.
I am trying to determine if this tool box would be appropriate for a 1941 12 cab 15wt 4x4 with 2B1 cargo box ?
The LH tool box use's bolts for assembly and has no cut out for gas tank filler spouts, it does have the spare tire brackets which are bolted on where as the Rh tool box the brackets are welded.
I have a 1942 13 cab Ford with 10:50 x 16 run flats w/ tool box but this has no provisions for the tire clamps, this tool box is also welded construction, cargo box is a 2C1 steel Budd.
|