View Single Post
  #158  
Old 20-03-07, 03:38
Alex Blair (RIP) Alex Blair (RIP) is offline
"Mr. Manual", sadly no longer with us
 
Join Date: Feb 2003
Location: Ottawa ,Canada
Posts: 2,916
Default Re: next sequence

Quote:
Originally posted by Bob Carriere
....forgot to mention the internal axle....R-Zeppa style.... was previously disassembled, washed clean and reassembled with hand rubbed Moly grease.

Next picture is the egg cup partly greased..... we very patiently emptied a full cartridge of grease with the new automatic grease gun. air powered...... I held the trigger and Grant did the cake decorating......

This was followed with squirting moly grease suing a large hypo needle attched to the grease gun fitting..... again I squeezed and Grant did the decorating. This will insure that the inner parts of the R-zeppa willbe filled with freash lube.
Bob..
Have to be careful not to over grease ..To much grease in the housing will take the seals out faster than anything..
And the manuals are esential,to hold the cussin' down..
Good looking job and well documented..

__________________
Alex Blair
:remember :support :drunk:
Reply With Quote