[ron]

Hello Dave,
The hull is certaily the remains of a carrier, they had removed the cross tube from behind the steel plate that is normaly behind the drivers seat back and cut two holes through the hull sides about where the seats would normaly have been,then fitted the cross tube there, they cut off the outside of the bracket that normaly held the single rear wheel
but left the extension protuding into the carrier as it usually does,
as they had moved the front cross tube into new holes cut in both sides for some reason this rear bogie was fitted into the original holes where the double bogie usually went, then they fitted the second double bogie and cross shaft though the holes where the single bogie normaly is, this was achieved by moving back the sprockets on the new extension, it is the remains of an original carrier with the addition of these other parts,
Regards,
Ron