CMP tool box clamps
I have sent out over 25 sets of plans .The tool box plans I sent out were for the later box . There is a couple of ways to make the clamps One is to make a set of molds out of reinforce cement useing a clamp to form the inside and out side molds Then use a big press to shape the metal .The clamp is 1/8 " sheet iron .Greese the iron well on both sides before pressing . The other way is to make a mold out of steel which will require some machineing . If 25 fellows are going to make tool boxes that's 50 clamps .And I'm sure there is alot more would like some also . I have seen the ones that were welded and they didn't apeal to me very mutch .Now if some one would lke to take on this prodject it sure would save alot of sweat and make alot of restorers happy ..
__________________
George is hooked on OD
5 window DT969
8 ton Fruehauf trailer
M2A1Halftrack ,CMP #11 F15A1 #13 F15A1
RAF Fordson Tractor, 42 WLC HD
No.2MK11 CT267514 center CB24713 bottom hull25701 ,No.2 MK2 parts
MK1 10128 ,(2) MK1 ,Parts Hull9305 .Hull 10407
Hull plate # 7250 all have walk plate on back steps
1917 Patent modle amphibious army tank
|