Mike
I have used "Devcon" a 2 part epoxy containing and used on aluminium. Readily available from the bearing supplier I was using at the time. Heard impressive stories about its use on ally boats, but had mixed results when using it to stick patches over holes in my Landy roof. Possibly too much vibration? Possibly me, although the surface was cleaned well. A few large rivets and the epoxy used as a sealer worked fine.
Worked better than the oxy-welding method outlined in the workshop manual!!!
Rich.
__________________
C60S
Austin Champ x 2
Humber 1 Ton & Trailer
|